IBM 3745 Service Functions page 248

o
o
D
Power OFF a Disk/Diskette Drive
You must be in the DIF function (see page 11-4)
with service mode 1 or 2 selected from the control
panel.
1. Enter 7 in
D.
2. Press SEND.
One of the following two messages is displayed in
fJ,
indicating the result of the operation
POWER OFF SUCCESSFUL. CONCURRENT MAINTENANCE
ACCEPTED
POWER OFF UNSUCCESSFUL. CONCURRENT MAINTENANCE
REJECTED
Power ON
Power OFF Disk/Diskette
DISK fUNCTION SELECTION
- SELECT ONE OF THE FOLLOIIHIG 'UNCTIONS
<=,
0
Fl :END
3 ~ qESTCRE DISK FROM DIS,ETTES
5 • DISK INITIALIZATION
6 ~ ~IS,ETTf 1'J!TIAlIlAr:~
7
~
POWER OfF DISK/DISKETTE DRIVES
F3:ALARM
Figure 11-24. Disk Function Selection Screen (IML from
Diskette)
Any action from the console will power ON the disk/diskette, issuing the fol-
lowing message:
DISK STARTING
Chapter 11. Disk-Diskette Management Functions
11-15