IBM 3745 Service Functions page 231

Return Codes
Return Code
In the message, which is available only in concurrent maintenance,
COMMAND FAILED: CP RETURN CODE: ACK
=
xxxx
CC
=
xx
• The ACK field can be:
X'8000' (CC
=
00)
X'8.000' (CC = other value)
X' 40xx' (CC
=
00)
Request completed
Request OK or not OK (see CC explanation table)
Request is rejected. The field xx can be:
X'40' Function not supported
X'20' Invalid command
X'08' Invalid parameters specified:
• The CC field values are explained in the next table:
Table 10-1 (Page 1 of 2). Return Codes
CC Explanation
UPDATE CDS
00 Update CDS complete
01 CA or LA not attached
02 CA or LA not Installed
03 CA or LA currently operative
12 Unused
20 CA not CACM mode dIsconnected
21 CA not bypassed from both ASC/CSCG
22 CA not 'Install In progress'
23 CA currently Installed
24
Function already performed
25 CA cannot be bypassed from both ASC/CSCG
DISCONNECT CA
00 Disconnect CA complete
02 CA not attached
03 CA not Installed
04 Function already performed
05 Disable already In progress (normal)
06 Disable already In progress (CA ERP InOP detected)
07 Disable initiated
08 CA In use by NCP/EP
09 PBF detected by L 1
OA ASCF detected by L 1
CONNECT CA
00 Connect CA complete
02 CA not attached
03 CA not Installed
04 CA not Inserted Into ASC and CSCG
05
CA not CACM mode disconnected
06
Invalid CA state: pending L3 found active
07
Invalid CA state: CA found Interface enabled
10-16
3745 Service Functions
I
/ '
I
\..
(
U
/':