IBM 3745 Service Functions page 204

o
:.1
o
I
o
o
D
Update an LA HPTSS
MOSS Online and Adapter Inoperative
1. You must be in the CDF display/update func-
tion (see page 9-15).
2. The adapter must not be connected.
• For information about the adapter status
and the way to modify it, refer to
Chapter 4, "Transmission Subsystem
(TSS) Functions" on page 4-1.
• The adapter (scanner) status is displayed
in the MSA (see "MSA Field Definition
(Scanner Information)" on page 1-14).
3. Display the selected LA (see "Display LA" on
page 9-29).
4. Press F5. This screen is displayed.
• Select option 3. Screen
1m]
is displayed.
Note that options 1 and 2 read to the message:
FUNCTION NOT SUPPORTED BY THIS MODEL
Adapter Operative
1. You must be in the CDF Display/update func-
tion (see page 9-15).
2. The adapter must be connected.
• For information about the adapter status,
and the way to modify it, refer to
Chapter 4, "Transmission Subsystem
(TSS) Functions" on page 4-1.
• The adapter (scanner) status is displayed
in the MSA (see "MSA Field Definition
(Scanner Information)" on page 1-14).
3. Display the selected LA (see "Display LA" on
page 9-29).
4. Press F5. Screen
1m
is displayed.
1. Enter the required values in
0
and
fJ.
2. Press SEND.
3. The following message is displayed:
UPDATE OF THE CDF FILE SUCCESSFUL
ERROR SEQUENCE Pattern sent in case of error
(default value: 7FFF).
DSR
Adjustable confirmation delay when the
data set ready (DSR) level changes
(default value: 16).
PORTx Port number.
COF·
KilNUM.m
SELECT ONE OPTION
(1 TO 3). THEN PRESS SEND
==>
0
Fl :ENO
I = REPLACE LA
2 = OFlETE LA
3
~
UPDATE LA PARAMETERS
F3:ALARM F6:QUIT F7:0ISPLAY
Figure 9-64. Update an LA HPTSS
Oil
COF - UPOATE : LA xx
SWITCH: -- LAB: -- PS 10 : -- AOOR : xx PORT! :
x~xx
IOC : 1 GROUP : x CCU: A TYPE : HPTSS PORT2: xxxx
l~ii!11:tli1!'iW*,
(6.1.4.16.32.64.128.256 MS):::
H
n:ENO
F3:ALARM F6:0UIT F7:0ISPLAY
Figure 9-65. Update Parameters of an LA HPTSS
Chapter 9. Configuration Data File (CDF)
9-35