IBM 3745 Service Functions page 15

Sign ON
How to Go from Initial Screen to Menu Screens
Sign ON Procedure
This is the first screen displayed after IML. It
gives the status of channel adapters.
You must sign ON before gaining access to the
menu screens.
1. Ask the customer to give you the maintenance
password.
2. If this screen is not already displayed, logoff
from MOSS (after customer approval) by
typing 'OFF'.
3. When this screen is displayed, press F4.
4. Screen
m
is displayed.
1. Enter the password in
D.
2. Press SEND.
3. Screen
II
is displayed.
You must use the maintenance password to
access the menu 3, or some mai'ntenance options
of the customer functions.
F
Keys action
F4 Retu rn to screen
Il
Go to the desired MENU screen by pressing any
of the following F keys
F2 Menu 2 screen
F4 Menu 1 screen
F5 Menu 3 screen (Available only if the mainte-
nance password was entered)
1-6
3745 Service Functions
CUSTOMER 10: 3745 SERIAL W!~BER:
3745 MICROCODE (Cl COPYRIGHT IB~' CORP: 1987
MAXI~1UM ADAPTER CONFIGURATION: CHANNEL ADAPTERS 5, 6, 7, 8
LINE ADAPTERS I, 3, 4, 9, 19, II, 12
• ••••••..••.••••••••••..••••••••••••••••••••••••••••••••••••••••
ff'~/dd/yy
hh:mn
CA INTERFACE DISPLAY
INTERFACE CHANGE E/D INTERFACE
~OST
OR CHAN'JEL NSC
NUMBER EID REO REOUEST STATUS SWITCH UNIT ADDRESS ADDRESS
D
lA
2A
3A
4A
SA 01 SABLED
26
6A DISABLED 21
7A DISABLED
aa
BA
DISABLED
sa
TYPE E OR 0 TO CHANGE THE ENABLE/DISABLE REQUEST, THEN PRESS SEND
F4:MOSS FUNCTIONS
F5:UPDATE
Figure 1-1. Channel Adapter Status Screen
CUSTOMER 10: 3745
SERIAL NUMBER:
3745 MICROCODE (C) COPYRIGHT IBM CORP: 1987
MAXIMUM ADAPTER CONFIGURATION: CHANNEL ADAPTERS 5, 6, 7, 8
LINE ADAPTERS I, 3, 4, 9, 16, 11, 12
••••..•••••••••••••••••••••••••••••••••••••••••••••••••••••••••• mm/dd/yy hh:mn
ENTER PASSWORD
===>
D
F4:CHANNEl INTERFACE DISPLAY
Figure 1-2. Password Screen
II
FUNCTION SELECTION RULES
• TO SElECT ONE OF THE MENUS, PRESS THE APPROPRIATE KEY
• TO SELECT A FUNCTION, ENTER ITS 3'CHARACTER NAME THEN PRESS
SE~O
• ONCE YOU HAVE SElECTED A FUNCTION FROM ONE MENU, yOU MAY SElECT
A FUNCTION FROM THE OTHER
• TO END THE FUNCTION ON SCREEN, PRESS F1
• TO RETURN TO THE PENDING FUNCTION, PRESS F2
• TO LOGOFF, ENTER OFF THEN PRESS SEND
F1 :END F2:MENU2 F3:ALARM F4:MENUI F5 :MENU 3
Figure 1-3. Function Selection Rules Screen
;-
(