IBM 3745 Service Functions page 230

o
o
I;
II
o
D
CA Messages
INTERFACE B DOES NOT EXIST
Cause: The ENB or DSB command has been Issued on a CA which does not have the TPS feature (Interface B does not eXist).
Action: None.
NO TRACE ACTIVE
Cause: The stop trace command has been Issued but no trace was active.
Action: None.
NO TRACE DATA
Cause:
No data has been traced. Either no trace has been started or no activity occurred
In
the CA while the trace was active.
Action:
None.
OPTION-REFUSED: CA IS NOT INSTALLED
Cause:
Self-explanatory.
Action: None.
OPTION REFUSED: CONNECTION CA-CCU UNKNOWN
Cause:
The connected CCU IS unknown.
Action: Re-IPL.
OPTION REFUSED: MOSS IS NOT ONLINE
Cause: No CACM IS allowed If MOSS IS not online.
Action:
Use the MaN command.
REQUEST SUCCESSFULLY TRANSMITTED
Cause:
Self-explanatory.
Action: None.
REQUEST SUCCESSFULLY TRANSMITTED BUT NOT SAVED DUE TO A DISK ERROR
Cause: The entered enable or disable command has been successfully executed but It was Impossible to save the request on
the disk.
Action: Retry, then if not successful, repair the disk.
w •••• "
MEANS RAM NOT READABLE IN FUNCTIONAL MODE
Cause: The specified CA IS Initialized and connected to a control program which IS actually running. To aVOid disturbing CA
operations, the RAM POSitions (indicated by ........ ) were not read.
Action: None.
w •••• w
MEANS REGISTER NOT IMPLEMENTED
Cause: The registers of categories 2 and 3 are mapped
In
the CA storage ....... " Indicates that no specific value has been
aSSigned to the corresponding storage position.
Action: None.
" .. " MEANS REGISTER NOT READABLE IN FUNCTIONAL MODE
Cause: The specified CA IS initialized and connected to a control program which IS actually running. To aVOid any disturbance
on the CA operations, some registers (indicated by .... H) were not read.
Action: None.
Chapter 10. CA Services
10-15