IBM 3745 Service Functions page 73

LlC 5/6
Lie 5/6 Wrap Test Data Display
Use the function in this page in conjunction with the wrap test (WTT) chapter of the Advanced Oper-
ations Guide, to display additional information about the
LIe
being tested.
1. The control progam must be loaded, and
MOSS Online.
2. You must log on with the maintenance pass-
word.
3. In
D
of 'MENU 1', enter WTT and press
SEND.
1. Select option 2 (wrap test at any level).
2. Press SEND. The next screen is displayed.
1. Select the line address in
D.
2. Select the wrap type 3 option (displayed in
service mode only), in
fJ.
3. Press
SEND.
The wrap level is forced to 'local modem', and the
wrap starts automatically with a default pattern.
4. The 'WRAP TEST START' screen is displayed.
Like any other wrap, this test may be stopped by
pressing the BREAK key.
5. On wrap test completion, the next screen is
displayed:
3-24
3745 Service Functions
CONFIG DATA FILE.: CDF
CONTROL PGM PROC.: CPP
DISK FUNCTIONS ••• : DIF
DISK IPl INFO •••• : orr
EVENT LOG DISPLAY: flO
IML ONE SCMNER •• : I~lS PASSWORDS •••••••• : PSW
IPL CCU •••••••••• : IPl PORT SWAP FILE. •• : PSF
LD LINK TEST REO.: lTO
lD LINK TEST RESP: lTS
SCANNER IfF TRACE: SIT
LINE INTERF DSPlY: LID STANO ALONE TEST.: SAT
LINK IPl PORTS ••• : LKP
INTERN. DATA FILE: IDF
IMl MOSS ••••••••• : IMl
MACHINE lVl TABLE: r4LT THlE SERVICES •••• :
TI~l
MICROCODE FIXES •• : MCF TRSS INTERF DSPlY: TID
WRAP TE ST. ••••••• : WTT
ENTER Off TO LOG OFF
===>
0
Fl:END F2:MENU2 F3:ALARM F5:MENU 3 F6:RULES
Figure 3-17. Menu 1 Screen
WRAP TEST INITIAL SELECTION
- SELECT ONE OPTION
0,
2) ==>
0
1
=
AUTOMATIC WRAP TEST ON lIC UNIT
2
=
WRAP TEST AT ANY LEVEL
THEN PRESS SEND
Fl :END F2:MENU2 F3:ALARM
Figure 3-18. Wrap Test Initial Selection Screen
WRAP TEST INITIALIZATION
- ENTER LINE ADDRESS (TSS: 0-S95 HPTSS: le24-1039) ==>
0
- ENTER WRAP TYPE ==>
D
1 = DATA
2 = CONTROL LEADS 3
=
DISPLAY LIC 5-6 REGISTERS
- ENTER WRAP LEVEL
(l
TO 6)
I = LOCAL MODEM 4
=
TAILGATE
2 = NTT CASlE (TSS ONLY) 5 = REMOTE MODEM (HPTSS & DATA WRAP ONLY)
3
=
lIC (TSS & DATA WRAP ONLY) 6
=
INTERNAL (HPTSS
orn
Y)
LINES TO SE TESTED ~lUST BE DISABLED/DEACTIVATED
Fl :END F2:MENU2 F3:ALARM F4:INITIALIZATION
Figure 3-19. Wrap Test Initialization Screen
(