IBM 3745 Service Functions page 48

o
ELD Detail Display
BER Display Screens
ELD DETAIL
SEL# 770 FLAG 00 DATE:12/02 TIME:06:53 TVPE:I0 ID:B2
CA5 UNRESOLVED DATA /STATUS INTERRUPT (Event Description) BAB2XXXX
X77:0000 X7F:OOOO XO:OOF3 Xl:**** X2:**** X3:**** X4:**** X5:****
X6:**** X7:**** XB:**** XC:**** XF:****
CAB:******** ******** ******** ******** ******** ********
******** ******** ******** ******** ******** ********
CAC:**** TA:** CAVT:****
===>
Fl:END F2:MENU2 F3:ALARH F4:SUMHARV F5:LIST F7:PREVIOUS F8:NEXT
Figure 2-20. ELD Detail Screen (Description)
This screen contains necessary error data appropriate to the type/ID of BER (for
field details, refer to the 'Error Logging' chapter of the Hardware Maintenance
Reference manual).
Common Fields in Header Lines (First Two Lines)
In each detail screen, the two top lines and the bottom line always have the
same format.
BAB2XXXX Reference code number produced by autoBER to be entered in the
BRC function.
SEL# Three digits (from 1 to 999) identifying the BER# (BER sequence
number in the BER file). You may display another BER by typing
another SEL# in this area.
FLAG
This field is not used.
DATE
TIME
Four digits defining month and day.
Four digits defining hour and minute. Same as in the BER list
screen.
TYPE
Two-digit hexadecimal number that categorizes the BER.
10 Two-digit hexadecimal number that specifies the origin of the BER
(BER identifier).
LOST Three digits defining the number of BERs that have been lost after
creation of this BER. This fie'ld is displayed only when BERs have
been lost. This field applies only to CP BERs.
CP-ABEND Four hexadecimal digits defining the abend code (this field does
not apply to MOSS BERs). The field is displayed only when there
is an abend code.
EVENT DESCRIPTION: One line giving a description of the event (CAS UNRE-
SOLVED DATA /STATUS INTERRUPT in the previous screen).
Chapter 2. BER (Box Event Records) Analysis
2-15