Traveling Forward And Reverse - JLG 400S Operation Manual

Traveling Forward and Reverse

1. At Platform Controls, pull out Emergency Stop
switch, start the engine, and activate foot-
switch.
2. Position Drive controller to FOR-
WARD or REVERSE as desired.
This machine is equipped with a Drive Orientation Indicator. The
yellow light on the platform control console indicates that the
boom is swung beyond the rear drive tires and the machine may
Drive/Steer in the opposite direction from the movement of the
controls. If the indicator is illuminated, operate the Drive function
in the following manner:
1. Match the black and
white direction arrows
on both platform con-
trol console and the
chassis to determine
the direction the
machine will travel.
3121670
2. Push and release the Drive Orientation Over-
ride switch. Within 3 seconds, slowly move the
Drive control toward the arrow matching the
intended direction of machine travel. The indi-
cator light will flash during the 3 second inter-
val until the drive function is selected.
– JLG Lift –
SECTION 4 - MACHINE OPERATION
4-9