Site Monitor - Cabletron Systems RoamAbout Access Point Manual

RoamAbout Client Utility

Site Monitor

You can use the RoamAbout Client Utility Site Monitor window (Figure 4-5) to monitor
the radio communications quality with multiple RoamAbout Access Points simultaneously.
The Site Monitor function is only available when the client utility is in enhanced mode,
which you can enable by clicking the Options button in the Status/Functions window.
The Site Monitor window only displays the Access Points within range of the client. If the
Site Monitor window does not display all the Access Points that you expect, the unlisted
Access Point might be out of range of your client or using another wireless network name.
The Site Monitor window offers a set of pull-down menus that enable you to display and
organize diagnostic information according to your preferences. The Site Monitor function
also allows you to save measurement data to a log file.
Figure 4-5: RoamAbout Client Utility Site Monitor Window
Installing the Wireless Network Tools 4-11