Checking Roamabout Product Version Numbers - Cabletron Systems RoamAbout Access Point Manual

Checking RoamAbout Product Version Numbers

Checking RoamAbout Product Version Numbers
To check the RoamAbout Access Point firmware version, run the RoamAbout AP
Manager, choose the Hardware button and check the software version (SW=Vx.x). Refer
to the AP Manager on-line help for additional information.
To check the RoamAbout Access Point firmware version using the console port, select
Show Current Settings from the Installation Menu. The top line contains the firmware
version (SW=Vx.x).
To check the versions of the RoamAbout PC Card Driver and Station Firmware in a
RoamAbout client, run the RoamAbout Client Utility, choose Diagnose Card then choose
the Version Info tab. The version of the client utility is also displayed.
If the client utility is not available, you can also check the driver version as follows:
1. Open Windows Explorer.
2. Find the WVLAN41.SYS file. Typically, this is located in the
C:\WINDOWS\SYSTEM folder for Windows 95 and 98, or the C:\WINNT\SYSTEM
folder for Windows NT.
3. Right click on the WVLAN41.SYS file then select Properties on the menu.
4. In the Properties window, click the Version tab. The File Version number near the top
of the window is the driver version number.
For information about the latest available versions, check the RoamAbout web site.
6-12 Maintaining the Wireless Network