Checking The Client Roamabout Pc Card - Cabletron Systems RoamAbout Access Point Manual

Checking the Client RoamAbout PC Card

Checking the Client RoamAbout PC Card
The RoamAbout Client Utility has a Diagnose Card tool that checks the hardware and
firmware of the RoamAbout PC Card.
Run the card test only in situations where the Status/Functions window reports a card
failure or when you suspect a configuration mismatch. When contacting RoamAbout
technical support, the card test results may help the support representative determine the
cause of a malfunctioning device.
To access the card test, select Diagnose Card from the Status/Functions window. For
information about the Diagnose Card tool, press <F1> while in the Card Check window.
Running the card test may temporarily disrupt the communication of your client with the
network. In exceptional cases, you may lose your network connection. If this occurs on a
Windows NT system, restart your system. If this occurs on a Windows 95 or 98 system:
1. Close the client utility program.
2. Remove the PC Card.
3. Wait several seconds then reinsert the card.
6-10 Maintaining the Wireless Network