Wep Excluded; Displaying Error Logs - Cabletron Systems RoamAbout Access Point Manual

WEP Excluded

This counter increments when this device sends unencrypted data to another device which
rejects the data. If this is a client in an infrastructure network, this can be caused when the
client has encryption disabled and the Access Point is configured to accept encrypted data
only (DENY NON-ENCRYPTED DATA is enabled).

Displaying Error Logs

The Access Point can display error logs used by support personnel to analyze system faults.
Up to four error log dumps can be stored, and the most recent dump is displayed first. There
are two types of error logs: one for Access Point settings and one for wireless settings.
To display the Access Point settings error logs using the console port, choose Dump Error
Log from the RoamAbout Access Point Installation Menu. This error log displays various
information, including current reset count and PC Card present/not present.
To see the reset count from the AP Manager, select the Access Point in the Managed List
field then click the Reset button. To display the wireless settings error logs in the AP
Manager, click the Troubleshooting button.
To display the wireless settings error logs using the console port:
1) Choose Module-Specific Options from the RoamAbout Access Point
2) Select Dump Error Log from the next menu.
The following example shows the screen associated with this option.
RoamAbout Access Point
================================================================
Product Specific
================================================================
Dump another Log entry [Y]/N ?
Installation Menu.
ERROR LOG
Entry Number = 58
Entry Type = OTHER EXCEPTIONS
Error Code = FC000200
Error Data =
0:0001E8C8
4:0000EEAC
Vector offset = 0512
1:00000000 2:20100700
5:00050400 6:0001CBAC
Displaying Error Logs
3:C3360200
7:01001596
Problem Solving 7-19