Removing The Apple Driver; Upgrading The Roamabout Pc Card Firmware - Cabletron Systems RoamAbout Access Point Manual

Removing the Apple Driver

Removing the Apple Driver
Removing a previously installed Apple driver is mandatory to:
•
Upgrade a driver.
•
Change the type of driver. For example, you would change the type of driver when
migrating from Apple Classic to Apple Open Transport.
To remove the driver, proceed as follows:
1. Insert the RoamAbout diskette for the MAC operating system into your Apple
PowerBook. This should be the same diskette that you used to install the driver.
2. Double-click the diskette icon on the desktop of your computer to display the contents
of this diskette.
3. Double-click RoamAbout Installer to start the installation program.
4. In the Welcome window, click Continue.
5. From the list of options, select Custom Remove. Click all boxes to completely remove
the driver. If you have any open applications, you are prompted to close them.
6. Follow the on-line instructions. When completed, restart your computer.

Upgrading the RoamAbout PC Card Firmware

You can use the RoamAbout Work Station Update (WSU) tool to update the firmware (also
called embedded software) of your RoamAbout PC Cards.
When new features for your RoamAbout PC Card become available, they are typically
distributed as a new version of the RoamAbout Work Station Update tool via the
RoamAbout web site.
To identify whether you need to update the firmware of the PC Card, verify the current
version of the Secondary Card Firmware loaded into the card using the Version Info tab
on the Diagnose Card panel of your RoamAbout Client Utility.
If you update your RoamAbout PC Card firmware, you may need to update the RoamAbout
driver as well. In most cases, the WSU tool prompts you to do so, prior to updating the card;
therefore, when browsing the RoamAbout web site to download newer versions of the
WSU tool, you should download the latest driver as well.
6-20 Maintaining the Wireless Network