Cabletron Systems RoamAbout Access Point Manual page 166

Index
BootP/TFTP 4-2, 5-31, 6-13
bridge 1-2
bridge mode
description 1-3
infrastructure network 5-3
integrity test 5-30
LAN-to-LAN Endpoint 5-6, 5-11
LAN-to-LAN Multipoint 5-16
Point-to-Multipoint 5-15
Point-to-Point 5-12
Bridge State LED 7-3
bridging services 1-2
broadcast message 2-13, 2-14
broadcast storm 2-14
building-to-building configuration 1-8
C
cell 1-6
Central Access Point description 1-9
channel
description 2-2
infrastructure network 5-3, 5-5
list of A-5
Point-to-Multipoint 5-14, 5-16
Point-to-Point 5-10, 5-12
client
behavior 1-7
configuring for ad-hoc network 5-18
configuring for infrastructure network
5-7–5-8
definition 1-4
system requirements 3-8
using 11 Mbit/s and 2 Mbit/s 2-5
Client for Microsoft Networks 7-24
Client for NetWare Networks 7-24
client properties 5-21
client utility
description
effect of encryption 4-7
initial window 4-7
installing 4-6
link test 4-9
Index-2
site monitor 4-11
test history 6-5
version 6-12
coldstart trap 7-29
Comma Separated Value (CSV) file 6-9
communications quality
description 2-5
testing 6-2–6-3
with Link Test 4-9
community name
See read/write community name
See read-only community name
computer name 7-25
configuration file (*.CFG) 4-4
console port
configuring a Point-to-Multipoint network
5-16–5-17
configuring a Point-to-Point network 5-12
configuring an infrastructure network
5-5–5-6
description 4-5
security 2-13
console port password
description 2-13
for security 5-29
infrastructure network 5-6
Point-to-Multipoint 5-17
Point-to-Point 5-12
counters
Access Point 7-13
PC Card 7-13–7-19
coverage area
definition 1-5
determining 3-2
overlap 3-4
size by transmit speed 3-2, 3-6, 3-7
using Site Monitor 6-6
CSMA/CA protocol 2-7
D
Data Link layer 1-2
data throughput efficiency