Status/Functions - Cabletron Systems RoamAbout Access Point Manual

RoamAbout Client Utility

Status/Functions

The RoamAbout Client Utility Status/Functions window (Figure 4-3) displays information
about the network connection and communications quality. If the client is unable to connect
to a network, the Status and Impact fields provide information that can help you determine
the cause.
Figure 4-3: RoamAbout Client Utility Status/Functions Window
Optionally, you can:
•
Click the Advice button for additional status information and to troubleshoot
unexpected results.
•
Click the Diagnose Card button to test the PC Card and to check the versions of
hardware, firmware, and software. Use this button when the Status/Functions window
indicates that the PC Card is not functioning properly.
•
Click the Link Test button to test a specific wireless link.
•
Click the Options button to access the enhanced mode setting, which allows you to
display or hide advanced diagnostic tools. This button also allows you display the
Status/Functions window immediately when you start the client utility.
•
Click the Site Monitor button to perform a site survey or optimize placement of the
Access Points. This button is displayed only when you use the Options button to
enable enhanced mode.
4-8 Installing the Wireless Network Tools