Table of Contents
Advertisement
Windows Does Not Detect the RoamAbout PC Card
Table 7-7: RoamAbout PC Card LED Description (Cont'd)
Power
Transmit
LED
/Receive
LED
Off
Off
Windows Does Not Detect the RoamAbout PC Card
If the RoamAbout PC Card was properly working at one time in the client, then the problem
could be one of the following:
•
The PC Card was removed and is no longer properly inserted. Reinsert the PC Card
into the PC Card slot.
•
The PC Card was removed and reinserted but the computer requires a reboot to
recognize the PC Card. Restart the computer.
•
The RoamAbout PC Card driver was improperly removed or corrupted. Remove the
existing driver, as described in the "Removing the RoamAbout Miniport Driver"
section on page 6-18. Then reinstall the driver.
7-22 Problem Solving
Description/Action
Card is not powered on.
The cause may be:
•
No driver loaded or installed.
•
Card and driver mismatch that prevented the driver from
loading.
•
Device conflict that prevented the driver from loading.
Actions:
•
Verify that a driver has been installed. If not, install the driver.
•
Determine if there is a conflict with another device as
described in the "Device Conflict on a Windows System"
section on page 7-26. Typically, this only happens on a
Windows NT system.
•
Verify the versions of the PC Card driver and Station firmware
as described in the "Checking RoamAbout Product Version
Numbers" section on page 6-12.
•
Consult the RoamAbout web site to see if newer versions are
available and if so, upgrade both the firmware and driver to the
latest available version.
Advertisement
Table of Contents
