Table of Contents
Advertisement
Checking the Network Protocols on a Windows System
Checking the Network Protocols on a Windows System
To verify that the client is configured for the correct type of networking and networking
protocols:
1) From the Windows desktop, click Start then select Settings → Control
2) Double-click Network. The following dialog box is displayed:
3) Verify that the list of network components includes Client for Microsoft
4) If the item you want is available, click Cancel and go to the next step. If the
5) If the proper client software is installed but you do not see the required
If this is the first time that networking support is installed on your computer, Windows
prompts you to enter the computer and workgroup names. These names are used to identify
your computer on the Microsoft Network Neighborhood.
7-24 Problem Solving
Panel.
Networks and, optionally, Client for NetWare Networks.
items you require are missing, click Add and select Add Client to add the
client software of the networking protocol that you want to install.
protocols, click Add then follow the on-line instructions.
Advertisement
Table of Contents
