Cabletron Systems RoamAbout Access Point Manual page 145

To enter the computer and workgroup names:
1) If the Network window shown below is not opened, click Start, select
Settings → Control Panel, then double click Network.
2) Click the Identification tab as shown below. The Windows NT version of
this window is similar.
3) In the Computer Name field, enter a unique name for your computer.
4) In the Workgroup field, enter the name of your workgroup. The name must
be the same for all computers in the wireless network.
5) Optionally, provide a description of the computer in the Computer
Description field.
For more information about setting your Windows network properties, consult the
Windows documentation or Windows on-line help.
Checking the Network Protocols on a Windows System
Problem Solving 7-25