Cabletron Systems RoamAbout Access Point Manual page 124

Using the Access Point LEDs to Determine the Problem
Table 7-2: RoamAbout Access Point 2000 LED Patterns
Wired Wireless
LAN LAN
7-4 Problem Solving
Access Bridge
Point State
Saturated
2 1
Power/ Meaning of LED
System Pattern
OK
No power. Check the
power connections.
Diagnostics failed.
The Access Point
automatically resets
after one minute. If
the pattern continues
to display, contact
technical support.
Normal operating
mode.
•
Access Point is
waiting for the
spanning tree. No
action is required.
or
•
Spanning tree
detected a bridge
loop and
disconnected the
port. Remove the
loop.
Access Point is
occasionally
saturated. No action
is required.
Cannot communicate
with the wireless
network. Verify that
the PC Card is
properly inserted.