Upgrading The Driver For Windows Nt; Upgrading The Driver For Windows 95 (Early Version) - Cabletron Systems RoamAbout Access Point Manual

Upgrading the Driver for Windows NT

Use the following procedure to upgrade the RoamAbout driver on Windows NT systems.
1. From the Taskbar on the Windows desktop, click Start then select Settings → Control
Panel.
2. In the Control Panel, double-click Network.
3. Select the Adapters tab.
4. Select RoamAbout Adapter and click Update.
5. Follow the instructions as they appear on your screen.

Upgrading the Driver for Windows 95 (Early Version)

Upgrading to a new driver on early versions of Windows 95 usually requires deleting the
old driver file from your hard disk before installing the new driver.
The early versions of Windows 95 associate a specific driver with specific hardware. When
you select the Remove Driver option from the Network Control Panel, the operating system
disables the driver but does not delete the driver from your hard disk. Therefore, when you
upgrade a driver, Windows recognizes your RoamAbout PC Card as hardware that had
been installed before and attempts to reinstall the old driver.
To upgrade your RoamAbout driver on an early version of Windows 95, follow the
procedure in "Deleting the RoamAbout Driver Files" section on page 6-18. Then, follow
the instructions that came with the RoamAbout PC Card to install the driver.
Upgrading the RoamAbout Miniport Driver
Maintaining the Wireless Network 6-17