Positioning The Vehicle On The Support Stand; Assembling The Pins For The Rear Support Stand; Positioning The Vehicle On The Rear Support Stand - APRILIA SL Mille Workshop Manual

SL mille
1.8 POSITIONING THE VEHICLE ON THE
SUPPORT STAND
1.8.1
ASSEMBLING THE PINS FOR THE REAR SUP-
PORT STAND.
NOTE
Have the appropriate special tool. to hand:
-aprilia part# 8140194 (rear support stand complete
with pins).
• Position the vehicle on the side stand on firm and level
ground.
• *Position the pin (1) on the appropriate seat on the
rear fork.
• *Screw and tighten the screw (2) in the appropriate
threaded hole in the rear fork.
1.8.2 POSITIONING THE VEHICLE ON THE REAR
SUPPORT STAND.
NOTE
Have the appropriate special tool. to hand:
- aprilia part# 8140194 (rear support stand complete
with pins).
• Fit the relevant pins, see 1.8.1 (ASSEMBLING THE
PINS FOR THE REAR SUPPORT STAND . ) .
NOTE
Have someone help you keep the vehicle in ver-
tical position with the two wheels on the ground.
• *Loosen the knob (3).
• *Move the fork support (4), positioning it so that the
width corresponds to the distance between the two pins
(1) on the rear fork.
• *Tighten the knob (3).
• At the same time introduce the two fork-shaped seats
(4) of the stand (5) under the two pins (1) provided on
the vehicle.
• Rest one foot on the rear part of the stand (5).
• Push the stand (5) downwards until it reaches the end
of its stroke.
1.8.3 POSITIONING THE VEHICLE ON THE FRONT
SUPPORT STAND.
NOTE
Have the appropriate special tool. to hand:
- aprilia part# 8140195 (front support stand).
• Position the vehicle on the appropriate rear support
stand, see 1.8.2 (POSITIONING THE VEHICLE ON
T.HE REAR SUPPORT STAND . ) .
• Insert the two ends of the stand (6) in the two holes (7)
positioned on the lower ends of the front fork.
• Rest one foot on the front part of the stand (6).
• Push the stand ·(6) downwards until it reaches the end
of its stroke.
GENERAL INFORMATION
Release 00/2001-05 - - - - - - - - - -
~------
0 -
13 -
00