APRILIA SL Mille Workshop Manual page 103

ENGINE
Follow~
Driving torque of the engine-frame lower fastening
screw: 50 Nm (5.0 kgm).
• Holding the inside nut (29) still, loosen the screw (30).
Driving torque of the engine-frame rear fastening
screw: 50 Nm (5.0 kgm).
• Holding the inside nut (31) still, loosen the screw (32).
• Unscrew and remove the two screws (33) and recover
the relevant washers (34).
• Recover the two spacers (35).
Driving torque of the engine-frame front fastening
screws: 50 Nm (5.0 kgm).
• Unscrew and remove the two screws (36) and recover
the washers (37).
Engine locking ring nut driving torque: 50 Nm (5.0
kgm).
• Use the special setscrew spanner
mil
(38) [aprilia
part# 8140203 (socket spanner for adjusting fork pin -
engine mounts)] to loosen and remove the lock rings
(39 - 40).·
Follow~
SL mille
11-
12-00
Release 00/2001-05