APRILIA SL Mille Workshop Manual page 104

SL mille
Follow~
Engine adjusting bush driving torque: 12 Nm (1.2
kgm).
• Unscrew the adjusting bushes (41) (42) all the way
until they touch the frame.
When reassembling, screw the adjusting bushes (41)
(42) on by hand all the way until they touch the en-
gine before torquing them to specification.
• Holding the inside nut still, loosen and remove the
screw (30).
• Holding the inside nut still, loosen and remove the
screw (32).
Driving torque of the engine-frame lower fastening
screw: 50 Nm (5.0 kgm).
• Holding the inside nut (43) still, loosen and remove the
screw (44).
Driving torque of the engine-frame rear fastening
screw: 50 Nm (5.0 kgm).
• Holding the inner nut (45) in its position, unscrew and
remove the screw (46), taking the spacer.
Follow~
ENGINE
Release 00/2001-05 - - - - - - - - - -
0-
1
3 - 00