CHANGING
Do not use filters that have already
been used.
◆
Replace the air cleaner (4) with a new
one of the same type.
ASSEMBLING THE PINS FOR THE
REAR SUPPORT STAND %
◆
Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).
[Position the pin (7) on the appropriate
seat on the rear fork.
[Screw and tighten the screw (8) in the
appropriate threaded hole in the rear
fork.
POSITIONING THE VEHICLE ON
THE REAR SUPPORT STAND %
◆
Assemble the two pins (7), see p. 67
(ASSEMBLING THE PINS FOR THE
REAR SUPPORT STAND %).
NOTE
Have someone help you keep the
vehicle in vertical position with the two
wheels on the ground.
[Loosen the knob (9).
[Move the fork support (10), positioning
it so that the width corresponds to the di-
stance between the two pins (7) on the
rear fork.
[Tighten the knob (9).
◆
At the same time introduce the two fork-
shaped seats (10) of the stand (11) un-
der the two pins (7) provided on the vehi-
cle.
◆
Rest one foot on the rear part of the
stand (11).
◆
Push the stand (11) downwards until it
reaches the end of its stroke.
Make sure that the vehicle is stable.
POSITIONING THE VEHICLE ON
THE FRONT SUPPORT STAND %
◆
Position the vehicle on the appropriate
rear support stand, see p. 67 (ASSEM-
BLING THE PINS FOR THE REAR
SUPPORT STAND %).
◆
Insert the two ends of the stand (12) in
the two holes (13) positioned on the
lower ends of the front fork.
◆
Rest one foot on the front part of the
stand (14).
◆
Push the stand (14) downwards until it
reaches the end of its stroke.
Make sure that the vehicle is stable.
!
use and maintenance RSV mille
- RSV mille R
!
67