Fitting The Pins For The Rear Wheel Stand; Positioning The Vehicle On The Rear Support Stand - APRILIA RSV 1000 TUONO R Manual

6
PARTIAL CLEANING
CAUTION
Do not press or hit the air filter meshing
(6). Do not use a screwdriver or any
other tools on the air filter.
u Hold the air filter (6) in a vertical position
and tap it repeatedly on a clean bench.
u If needed, blow the air filter (6) with an air
line. Aim the nozzle from the inside of the
meshing outwards.
CAUTION
When cleaning the air filter, ensure the
meshing is not torn. Always change a
damaged air filter.
u Clean the outer surface of the air filter (6)
with a clean cloth.
REPLACEMENT
CAUTION
Never reuse a filter.
u Replace the air filter (6) with a new air
filter of the same type.
FITTING THE PINS FOR THE REAR
WHEEL STAND
u Position the vehicle on the stand, see
page 56 (PLACING THE VEHICLE ON
THE STAND).
 Fit the pin (7) into the suitable seat in
the swinging arm.
 Start the screw (8) into the threaded
hole in the swinging arm and tighten.
POSITIONING THE VEHICLE ON
THE REAR SUPPORT STAND
u Fit the two pins (7), see page 67
(FITTING THE PINS FOR THE REAR
WHEEL STAND).
use and maintenance RSV 1000 TUONO R
67