Connecting To The Utp5 Port - 3Com CoreBuilder 9000 Getting Started Manual

Atm interface module

Hide thumbs Also See for CoreBuilder 9000:

Table of Contents

5: C

HAPTER

ONNECTING TO THE

Connecting to the

UTP5 Port

ETWORK

The 155 Mbps-over-UTP5 daughter card has four ports, each equipped

with a 8-pin RJ-45 connector, which is designated as a network device. To

connect to the port, the connector must be wired as a user device as

indicated in Table 5:

Table 5 Pins in RJ-45 connector

Pin Number In User Device

transmit +

transmit -

-----

receive +

receive -

In Network Device