Safety And Handling Precautions; Safety Precautions - 3Com CoreBuilder 9000 Getting Started Manual

2

Safety Precautions

S
AFETY AND
P
RECAUTIONS
This chapter contains safety warnings and precautions that you should
strictly adhere to when you use any of the CoreBuilder
components. It contains the following topics:


Safety Precautions


Handling Precautions


Précautions de Sécurité


Précautions de Manipulation


Sicherheitsvorkehrungen


Vorkehrungen beim Umgang mit dem Modul


Unpacking Procedure
When you handle components in a CoreBuilder 9000 system, be sure
that you follow all safety precautions. To avoid electric shocks, burns, fire
or equipment damage, read and follow these warnings:
WARNING: Hazardous energy exists within the CoreBuilder 9000 system.
Use extreme caution when you install, remove, or replace the ATM
Interface Module.
WARNING: The ATM Interface Module must be installed, removed, or
replaced only by trained service personnel.
WARNING: When the CoreBuilder 9000 system is on, never insert metal
objects, such as a screwdriver into open module slots and be sure to
remove all hand-worn jewelry (such as watches and rings). When the
system is on, do not touch any connections within the chassis with your
fingers. Do not insert metal objects into the backplane.
H
ANDLING
® 9000 system