Configure Video Loss Alarm; Configure Video Tampering Alarm - HIKVISION DS-7600NXI-I/S User Manual

11.4 Configure Video Loss Alarm

Purpose
The video loss detection enables to detect video loss of a channel and take alarm response
action(s).
Step 1 Go to System > Event > Normal Event > Video Loss
Step 2 Select the camera to configure the video loss detection.
Step 3 Check Enable.
Step 4 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 5 Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.

11.5 Configure Video Tampering Alarm

Purpose:
The video tampering detection enables to trigger alarm when the camera lens is covered and take
alarm response action(s).
Step 1 Go to System > Event > Normal Event > Video Tampering.
Network Video Recorder User Manual
Figure 11-5 Set Video Loss Detection
106