Adjusting The Panorama Image (D16-Panorama/180° Only) - Mobotix D16 DualDome Manual

D16 Camera Manual: Operating the Camera
3.4.2 Adjusting the Panorama Image (D16-Panorama/180° Only)
The D16-Panorama/180° with integrated panorama feature has two wide-angle lenses B036*
(103°) that are mounted on a sensor bridge in such a way that they produce a panorama
image. Due to tiny differences in the lens position, the images of the two lenses do not
always fit perfectly.
Make sure that the camera is not tilted too far down to ensure that you get a good
panorama image. The image area that is most interesting for the viewer should be in
the center of the image so that the camera creates an image that is as close to reality
as possible.
Adjusting the Panorama Image in the Web Browser
You need to follow these extra steps when installing a D16-Panorama/180° to create a good combined
image from the two single images (left and right image sensor).
Step 1: Activate the configuration for the panorama view
Open the user interface of the camera in the browser. Click on the Configuration For The Panorama
View Quick Control above the live image and set the value in the field to the right to Activate.
Step 2: Image adjustment using the OnScreen control
As soon as you click the live image of the camera, an OnScreen Control appears in the top left corner
of the live camera image. Using these elements, you can adjust the two individual sensor images to
form the desired panorama image. This requires a resolution of at least VGA. If your currently set
resolution is less than VGA, the camera automatically switches to VGA mode to carry out the adjustment
and it returns to the original resolution after the OnScreen Control is hidden again.
80
Note