Mobotix D16 DualDome Manual page 42

D16 Camera Manual: Installation
5. Insert USB cable : Insert the MOBOTIX USB cable from below through the cable
outlet (see figure) and wrap it around the camera within the cable guides.
6. Plug in the USB connector : Insert the MiniUSB connec-
tor in the appropriate socket. Make sure that the cable
is correctly fitted into the cable guides and that there is
no excess cable in front of the connections.
7. Place the USB cable in the cable guides : Carefully
bend the cable guides upwards, place the USB cable
in the guides and snap the cable guides closed again.
8. Check the position of the cables : The two cables
should now cross one another just before the
connectors.
9. Install cable cover : Push the cable cover back into
its seat and fasten the two M4x25 Allen screws. When
mounting the cable cover, take care to properly align
the cover with the seal of the camera housing and the
two cable guides. This is the only way to ensure that
the connections are reliably protected against any
kind of weather.
42