Adjusting The Panorama Image (D14D 180° Only) - Mobotix D14D Manual

104
/132
D14D Camera Manual: Operating The Camera
3.4.2 Adjusting The Panorama Image (D14D 180° Only)
The D14D 180° with integrated panorama function has two 90° wide-angle lenses that
are mounted on a lens bridge in such a way that they produce a 180° dual image. The
two individual images do not always fit together completely and seamlessly because of
the mounting position of the individual cameras and the lens adjustment.
Make sure that the camera is not tilted too far down to ensure that you get a good panorama
image. The image area that is most interesting for the viewer should be in the center of
the image so that the camera creates an image that is as close to reality as possible.
Adjusting The Panorama Image In The Web Browser
You need to follow these extra steps when installing a D14D 180° to create a good combined
image from the two single images (left and right image sensor).
Step 1: Activate the configuration for the panorama view
Open the user interface of the camera in the browser. Click on the Configuration For The
Panorama View Quick Control above the live image and set the value in the field to the
right to Activate.
Step 2: Image adjustment using OnScreen Control
As soon as you click on the live image of the camera, an OnScreen Control appears in the
top left corner of the live camera image. Using these elements, you can adjust the two
individual sensor images to form the desired panorama image. This requires a resolution
of at least VGA. If your currently set resolution is less than VGA, the camera automatically
switches in VGA mode to carry out the adjustment and it returns to the original resolution
after the OnScreen Control is hidden again.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
Note
www.mobotix.com • sales@mobotix.com