Adjusting The Panorama Image (D15-180 Only) - Mobotix D15 Manual

92
/112
*For an explanation of
the sensor module desig-
nations (e.g., L20‑L23),
please read Section 1.2.1,
«D15 Lens Options»
D15 Camera Manual: Operating the Camera

3.4.2 Adjusting the Panorama Image (D15-180 Only)

The D15-180 with integrated panorama feature has two wide-angle lenses L20-L23* (6MP
– 105°, 5MP – 92°) that are mounted on a lens bridge in such a way that they produce
a panorama image. Due to tiny differences in the lens position, the images of the two
lenses do not always fit perfectly.
Make sure that the camera is not tilted too far down to ensure that you get a good
panorama image. The image area that is most interesting for the viewer should be
in the center of the image so that the camera creates an image that is as close to
reality as possible.
Adjusting the Panorama Image in the Web Browser
You need to follow these extra steps when installing a D15-180 to create a good combined image
from the two single images (left and right image sensor).
Step 1: Activate the configuration for the panorama view
Open the user interface of the camera in the browser. Click on the Configuration For The Panorama
View Quick Control above the live image and set the value in the field to the right to Activate.
Step 2: Image adjustment using the OnScreen control
As soon as you click the live image of the camera, an OnScreen Control appears in the top left
corner of the live camera image. Using these elements, you can adjust the two individual sensor
images to form the desired panorama image. This requires a resolution of at least VGA. If your
currently set resolution is less than VGA, the camera automatically switches to VGA mode to carry
out the adjustment and it returns to the original resolution after the OnScreen Control is hidden
again.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
Note
www.mobotix.com • sales@mobotix.com