Vaisala VaiNet RFL100 User Manual page 16

RFL100 User Guide
Symbols on display
2.4.1 Connection examples
14
Description
Data logger is successfully connected to an access point, and
connection between the access point and viewLinc server is also
OK. The viewLinc symbol is flashing to indicate that the data
logger is waiting to be accepted to the viewLinc system as a new
device.
Data logger is successfully connected to an access point, and
connection between the access point and viewLinc server is also
OK. Data logger has been accepted to the viewLinc system.
Looking for an access point to join: Line
between data logger and access point
symbols is blinking, and signal strength
indicator shows no bars.
Connected to an access point but
viewLinc Enterprise Server not
discovered yet: Signal strength indicator
point connection.
shows the strength of the access
M211861EN-D