Table 4 Symbols; Table 5 Connection States - Vaisala VaiNet RFL100 User Manual

Symbol on display
2.4 Connection indicators
Table 4 Symbols
Symbol Description
Data logger
Access point
viewLinc Enterprise Server
Table 5 Connection states
Symbols on display
Description
Battery voltage is too low to support radio communication. Data
logging continues locally for 2 ... 4 weeks until battery voltage is
too low. The last bar of the battery symbol is flashing and error
code Err 103 is shown on the display.
Replace batteries immediately.
Battery voltage is too low for operation. Data logging is stopped.
Only the empty battery symbol is shown on the display.
Replace batteries to resume normal operation.
Symbol
Description
Data logger is searching for an access point.
Data logger has failed to find an access point that is in installation
mode. viewLinc server icon is not shown, as the data logger has
not been accepted to a viewLinc system yet.
The data logger has failed to connect to an access point that
belongs to its own network.
Data logger is successfully connected to an access point, but
there is no connection between the access point and viewLinc
server. Data logger has not been accepted to a viewLinc system
yet.
Data logger is successfully connected to an access point, but
there is no connection between the access point and viewLinc
server. Data logger has been accepted to a viewLinc system.
Chapter 2 – Product overview
Description
Connection OK
Connection currently
unavailable
13