Rain Sensor; Firmware Update; Profile / User Management / Choice Of Preferred Dealer / Messaging; Anti-Theft Alarm - Stiga A1500 Instruction Manual

4.7.18. RAIN SENSOR

The "Rain sensor" function allows to enable or disable the rain sensor on the robot lawn mower. The rain
sensor can be set to three di昀昀erent sensitivity levels. A higher sensitivity corresponds to a prolonged
permanence in the base in case of rain.
Low sensitivity: 4 hours, Medium sensitivity: 8 hours, High sensitivity: 12 hours,
Procedure:
1. Activate the function from the app's "settings" menu.

4.7.19. FIRMWARE UPDATE

Firmware updates for the product, if available, shall be displayed on the product display page under
"Garage".
Available updates are performed in sequential order: robot lawn mower, reference station, docking station
During the update, the phone must be kept close to the device being updated. The update of each device
may take between 10 to 20 minutes.
The user can also access the menu on the product display page under "Garage" to check for updates and
force a 昀椀rmware update.

4.7.20. PROFILE / USER MANAGEMENT / CHOICE OF PREFERRED DEALER / MESSAGING

From the "Pro昀椀le" section, users can edit their account details and change their password.
The main user who registered for the 昀椀rst time can invite and manage other robot lawn mower users.
The invited user must download the App on their mobile device and must register.
The "Dealer" section allows to choose the reference service centre.
The "Messages" section allows to view messages \ information.

4.7.21. ANTI-THEFT ALARM

This function allows the user to receive a warning noti昀椀cation when the robot lawn mower is distant from
the work area. If the function is active, the robot lawn mower will continuously monitor its distance from the
virtual perimeter. When the robot lawn mower is moved away from the virtual perimeter for more than 100
metres:
• The robot sends a noti昀椀cation to the user's mobile device through the Stiga.GO App.
• On the app, it is possible to view the actual position of the robot and track its movements.
• It is not possible to start the robot lawn mower to work as long as it is outside its virtual perimeter.
NOTE: The Anti-Theft function remains active even if the robot lawn mower is switched o昀昀. In
this case, a theft noti昀椀cation and the location of the robot lawn mower are sent once the robot is
switched on.
Procedure:
1. Activate the function from the app's "settings" menu. Ensure that Stiga.GO App noti昀椀cations have
been activated on the mobile device.
EN 4. INSTALLATION 39