Portion Control Programming (Mvu) (No Topoff) - lancer 2308 Series Installation And Service Manual

2.7 PORTION CONTROL PROGRAMMING (MVU) (NO TOP-OFF)
A. Press the S and XL at the same time for
five seconds to enter the portion setting
mode.
1. The Pour/Cancel light will illuminate and
the shot light will blink two times.
Press the Brand button.
1. The selected brand's LED will illuminate.
2. Multiple brands can be programmed at the same time to pour the same amounts for each
size during this step.
Do this by selecting several brand buttons; however, the first button selected will illuminate
and only its beverage will pour. The other brands selected will flash slowly.
3. If multi-brand programming, do not set carbonated drinks and non-carbonated drinks at the
same time because carbonated drinks will foam.
NOTE: The LED will blink twice and turn off if the brand has been programmed as a flavor shot
instead of a drink. You will need to reprogram the brand as a drink prior to setting the
portion.
C. Fill cup 1/3 full with ice and place it under
the nozzle, push and hold a drink "size"
button until the cup is full.
1. Once the pour is completed, the LED will
blink slowly to indicate that a new pour
duration has been programmed for that
key.
P.N. 28-0720/05
14