lancer 2308 Series Installation And Service Manual page 16

B. Press the brand button.
1. The selected brand's LED will illuminate.
2. Multiple brands can be programmed at the
same time to pour the same amounts for
each size during this step. Do this by
selecting
however, the first button selected will
illuminate and only its beverage will pour.
The other brands selected will flash
slowly.
3. If multi-brand programming, do not set
carbonated drinks and non-carbonated
drinks at the same time because
carbonated drinks tend to pour faster.
C. Fill cup 1/3 full with ice.
D. Place cup under the nozzle, push and
hold a drink "size" button until the cup is
full.
1. Once the pour is completed, the LED will
blink fast to indicate Settle Time
programming mode.
2. If the duration is more than 40 seconds,
the dispense function is stopped and the
portion is not saved.
E. After beverage settles, press the Size button again to top off the drink.
1. If the settle time is more than fifteen seconds, the auto top-off times are cleared for all
selected flavors.
F. Repeat steps B-E for additional brands and cup sizes.
G. Press Pour/Cancel button to save the
portions and exit programming mode.
1. If no button is pressed in 60 seconds, the
system will exit program mode and save
the current programming.
2. The Pour/Cancel will blink until the
program is saved.
P.N. 28-0720/05
several brand buttons;
16