Mvu Operation; Mvu Plumbing Diagram - Making Connections To The Mvu; System Startup - lancer 2308 Series Installation And Service Manual

2. MVU OPERATION

2.1

MVU PLUMBING DIAGRAM - MAKING CONNECTIONS TO THE MVU

A. Valves 1-3 and 6-8 are in the normal positions on the tower; however, the MVU is plumbed as
shown in the diagram below. Position A is syrup inlet #4 on the cold plate. Position D is syrup
inlet #5. Positions B, C, E, and F on the MVU connect in the positions shown on the illustration
of the Configurator block. These positions (B, C, E, F) are all ambient (bypass the cold plate).
2.2

SYSTEM STARTUP

A. Turn on water and purge lines.
B. Turn on CO2 and gas out dispenser.
C. Plug in carbonator pump.
D. Cycle valves two times.
E. Turn on CO2 to BIB pumps.
F. Pour several drinks.
G. Prime for flavor shots.
H. Prime for beverages.
P.N. 28-0720/05
8