Replacement / Removal - NEC Express5800/E120d-1 User Manual

Chapter 2 Preparations
13. Set an addition fan in a fan bracket.
14. Connect the fan cable with connector on motherboard.
15. Continue to install or remove internal optional devices, mount and connect the server, and turn it on.
16. Run BIOS Setup Utility (SETUP) to confirm the following settings. Refer to Chapter 3 (2.BIOS Setup
Utility (SETUP)) for BIOS Setup Utility.
Advanced  Processor Configuration  Processor Information
1.6.2

Replacement / Removal

To remove processor (CPU), reverse the installation procedure.
54
[CPU ID]
[L2 Cache RAM]
[L3 Cache RAM]
 Do not remove any processor unless it is failed.
Important
 To remove the heat sink from the processor, first turn the heat sink to the left and
right lightly to make sure that the heat sink can be apart from the processor.
Removing the heat sink with it adhering to the processor may cause the
processor and/or CPU socket to be defected.
Express5800/E120d-1 User's Guide
1. Installing Internal Optional Devices