NEC Express5800/E120d-1 User Manual page 36

Chapter 1 General Description
(1) Power connector
(2) PM-BUS connector
(3) DIMM socket
(4) Power connector(CPU)
(5) Outside connection connector
(See page 32.)
(6) UID switch
(7) Clear CMOS Jumper switch
(8) RAID configuration Jumper switch
(9) Clear Password Jumper switch
(10) PCI Riser Card connector
For the supported board specifications, refer to Chapter 2
(1.8 PCI Card).
(11) SPI Flash Mezzanine connector
EXPRESSSCOPE Profile Key (SPI flash memory) has
been installed, where BIOS and BMC configuration data is
stored. Relocate it when replacing motherboard to inherit
configuration data.
36
(12) Serial port B(COM 2) connector
(Option connector)
COM2 is indicated at on the OS or NEC ESMPRO Agent,
but it's no problem .
When using COM2, use [N8117-01A Addition RS-232C
Connector Kit].
(13) Internal Flash Memory connector
(14) Front Panel connector
(15) USB connector (front)
(16) VGA connector (front)
(17) Lithium battery
(18) HDD BP connector
(19) SATA connector
(20) Processor(CPU) soket
-1: Processor#1 (CPU#1)
-2: Processor#2 (CPU#2)
(21) USB Option connector
Express5800/E120d-1 User's Guide
4. Names and Functions of Parts