Dimm Installation Order - NEC Express5800/E120d-1 User Manual

Chapter 2 Preparations
1.7.3

DIMM installation order

In 1-CPU configuration, install two DIMMs starting from the smallest slot number.
In 2-CPU configuration, alternately install two DIMMs starting from the smallest slot number of each CPU.
Installation order depends on combination of DIMMs to be installed. See the table below to find allowable
combination of DIMMs, and install DIMMs starting from the largest capacity and from the smallest slot number.
N8102-509F 2GB DDR3-1600 UNB Memory Kit
N8102-510F 4GB DDR3-1600 UNB Memory Kit
N8102-512F 16GB DDR3-1600 REG Memory Kit
N8102-513F 32GB DDR3-1066 REG Memory Kit
N8102-513F 32GB DDR3-1066 REG Memory Kit
: Allowed to be install together.
58
 DIMM installation order in 1-CPU configuration differs from that in 2-CPU
Note
configuration.
 If CPU2 is not installed, CPU2_DIMM1 to CPU2_DIMM6 are disabled.
 Refer to List of features supported by additiional memory board before using
memory RAS feature.
N code
509F
: Not allowed to be install together.
Express5800/E120d-1 User's Guide
N8102-
510F 511F 512F 513F
 
○ ○
 
○ ○
 
○ ○ ○
 
○ ○ ○
 
○ ○ ○
1. Installing Internal Optional Devices

