Supported Boards And Available Slots - NEC Express5800/E120d-1 User Manual

Chapter 2 Preparations
1.8.2

Supported boards and available slots

The following tables list supported boards and slots available for them. For details of the features of each
board, refer to the manual supplied with it.
Product Product
number name
N8103-149 RAID Controller (512 MB, RAID 0/1)
(PCI EXPRESS 2.0 (x8))
N8103-150 RAID Controller (512 MB, RAID 0/1/5/6)
(PCI EXPRESS 2.0 (x8))
N8103-151 RAID Controller (1 GB, RAID 0/1/5/6)
(PCI EXPRESS 2.0 (x8))
N8103-152 RAID Controller(1 GB, RAID 0/1/5/6)
(PCI EXPRESS 3.0 (x8))
N8103-160 RAID Controller (1 GB, RAID 0/1/5/6)
(PCI EXPRESS 2.0 (x8))
N8103-142 SAS Controller
(PCI EXPRESS 2.0 (x8))
N8190-153 Fibre Channel Controller
(8 Gbps/Optical)
(PCI EXPRESS 2.0 (x8))
N8190-154 Fibre Channel Controller (2ch) (8
Gbps/Optical)
(PCI EXPRESS 2.0 (x8))
N8104-138 1000BASE-T Adapter (1ch)
(PCI EXPRESS 2.0 (x1))
N8104-132 1000BASE-T Adapter (2ch)
(PCI EXPRESS 2.0 (x1))
N8104-133 1000BASE-T Adapter (4ch)
(PCI EXPRESS 2.0 (x2))
N8104-128 10GBASE Adapter (SFP+/2ch)
(PCI EXPRESS 2.0 (x8))
N8104-131 10G Converged Network Adapter
(2ch)(10Gbps/Optical)
(PCI EXPRESS 2.0 (x8))
N8117-01A Additional RS-232C connector kit *3
: Can be mounted, –: Cannot be mounted
Data transfer rate of PCI slot = Transfer bandwidth  Number of lanes
*1
<Example> x8 lane = 64 Gbps (one-way)
*2 Connector size. Cards exceeding the number of sockets cannot be connected.
<Example> x4 socket can connect with x1 and x4 cards, but not x8 card.
*3 Use RS-232C cable (B).
* For details of functions of each card, refer to the Technical Guide.
* The card performance described in the parentheses after the Product name indicates the maximum operation performance of the card.
62
Slot number PCIe 3.0 #1
PCI slot performance *1 x8 lane
Socket type *2 X16 socket
Transfer bandwidth
(per lane) *1
Slot size
Available card size
－
Express5800/E120d-1 User's Guide
PCIe 3.0 #2
x8 lane
x8 socket
8 Gb/s
Low Profile
180 mm max.
Dedicated to connecting internal hard disk

–
drive.
Additional battery N8103-154 can be
 mounted.
–
Dedicated to connecting internal hard disk
drive.
Additional battery N8103-154 can be

–
mounted.
MegaRAID CacheCade N8103-156 can be
mounted.
Dedicated to connecting internal hard disk

drive.
Flash BackUp Unit is mounted as standard.
Dedicated to connecting external devices.
Additional battery N8103-162 can be
 
mounted.
Up to two additional batteries can be
mounted.
Dedicated to connecting external devices.
 
Dedicated to connecting external Fibre
 
Channel devices.
Dedicated to connecting external Fibre
 
Channel devices.
For additional LAN port.
 
Card type: PCI Express 2.0(x4)
For additional LAN port.
 
Card type: PCI Express 2.0(x4)
For additional LAN port.
 
LAN cable with modular cover
cannot be used.
For additional LAN port.
 
Prepare SFP module N8104-129 if needed.
Up to one in RHEL6.
For additional DCB/FCoE.
SFP+ module has been attached to the
server.
FC bus redundancy is supported by
 
StoragePathSavior.
Teaming/bonding with LAN is not available.
As LAN of N8104-131, use, in 1 system, only
1 port.
 
For additional serial port B (RS-232C)
1. Installing Internal Optional Devices
Remarks