Chapter 2 Preparations
5.
Install the additional battery to the battery tray
by using 3 screws. The installation position of
the battery depends on installed RAID
Controller. See the figure on the right.
6.
For removing the battery for the RAID Controller, reverse the step2, 3.
7.
Connect the battery control cable to the
RAID controller
(3) Removal
For removing the battery for the RAID Controller, reverse the installation procedure.
Note
The battery control cable and the connector of RAID controller have a black
marking.
Connect a cable so that Black marking will fit the connector.
Express5800/E120d-1 User's Guide
1. Installing Internal Optional Devices
Attach the battery
for RAID Controller i
Attach the battery
nstalled in PCI#1
for RAID Controller i
nstalled in PCI#2
71