NEC Express5800/E120d-1 User Manual page 85

Chapter 2 Preparations
(1) Installation

Preparation for mounting
The left and right slide rails are fixed with tape at the front and side faces to prevent falling off during
transportation. Remove the tape before mounting it to the rack.
Removing rail assemblies
1. Remove the slide rails from left and right
sides of the server.
2. While pressing the unlock button at the
front of the server, hold the rail and slowly
slide it backward.
3. After removing the outer rail, only the inner
rail is screwed to the server.
 The outer rail removed is used later in the subsequent procedure.
Important
 Be careful not to get your finger caught in the rail.
Express5800/E120d-1 User's Guide
2. Installation and Connection
Press the button
to unlock
Inner rail
85