NEC Express5800/E120d-1 User Manual page 28

Hide thumbs Also See for Express5800/E120d-1:
Table of Contents

Advertisement

Chapter 1 General Description
Expandability
Many option slot
PCI Express 3.0 (x8 lanes, x16slots): 1 slot (Low profile)
PCI Express 3.0 (x8 lanes, x8slots): 1 slot (Low profile)
Large capacity memory of up to 384 GB *3
Can upgrade to multi-processor system with up to two processors
 2.5-inch drive bay (for hard disk drives): 8 slots
USB2.0 interface (Front: 2 ports, rear: 4 ports, internal: 2 ports)
Two ports for standard LAN, One port for management LAN
Ready to use
No cable connection is required to install a hard disk drive (hot swap supported).
 Slide rails can be installed with one-touch.
Many built-in Features
El Torito Bootable CD-ROM (no emulation mode) format supported
Software power-off
Remote power-on feature
AC-Link feature
Remote console feature
Power switch mask
Connector for display unit provided on front panel
Baseboard Management Controller (BMC) conforming to IPMI v2.0
Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D) utility
Easy setup
EXPRESSBUILDER (setup utility)
BIOS Setup utility (SETUP)
Maintenance features
Off-line Tools
Memory dump feature using DUMP Switch
Feature to back up and restore BIOS/BMC settings using EXPRESSSCOPE Profile Key
*1: Unsupported on Xeon
*2: Processor core speed depends on processor type, number and type of DIMMs installed, and operating
voltage (1.35/1.5 V).
*3: In 2-CPU configuration. Up to 192 GB in 1-CPU configuration.
28
®
processor E5-2407 embedded models.
Express5800/E120d-1 User's Guide
3. Features

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nec express5800 series

Table of Contents