Salus Connected Wireless System Manual page 8

Section 2
Step 4. Select the check box
next to Embedded Door Sensor
and press "Connect equipment"
Step 7. Choose from setup
options specific to this device .
Press "Complete set up . "
After several minutes without the plunger switch depressed, an issue alert will show on the home screen.
Module 2 – Wireless Accessories
SS881ZB Embedded Door Sensor
Step 5. Enter a unique
descriptive name to identify
the device . Press "Next"
Step 8. Press "Finish" to
complete pairing .
Step 6. Press "Please click
here to setup . "
A new icon will appear on
your home screen . Since the
sensor is not installed it shows
the door open .
2-3