Salus Connected Wireless System Manual page 35

Section 6
Battery Replacement
If the battery is low, the sensor icon on
the SALUS Smart Home dashboard will
turn red and the Issue indicator will
register a message . Use only a CR2,
3 volt lithium battery for replacement .
Step 1. Remove the
Sensor face plate by
sliding it up and off
of the Sensor body .
Battery Disposal
Module 2 – Wireless Accessories
SS909ZB Temperature Sensor
Step 2. Gently pull on
the positive end of the
battery and lift it out of
the Sensor body .
Lithium batteries are considered hazardous waste in most
municipalities . Dispose of the used lithium batteries in accordance
with all applicable local regulations .
Step 3. Insert the
new battery with the
positive end facing
down .
Step 4. Slide the face
plate over the Sensor
body and down to
lock it in place .
6-5