Table of Contents
Advertisement
Section 2
Module 1 of the SALUS Wireless Systems Guide provides information about installation/setup of the
SG888ZB Gateway that provides communication between devices and, if desired, with the internet .
The following descriptions provide instructions for installation of the hydronic components .
Overview
Installation
Slots
Plunger Switch/LED
Battery Cover
Sleeve
"Clicker"
Pair the SS881ZB Embedded Door Sensor with the SG888ZB Gateway prior to installation.
Parts Included / Installation Tools
Confirm that all required parts are present in the SS881ZB package:
Sensor w/ Battery
(CR2, 3Vdc)
Confirm that required tools are available:
7/8" Drill Bit
Module 2 – Wireless Accessories
SS881ZB Embedded Door Sensor
Sleeve
Slots
Tamper Switch
Sensor Sleeve
Installation Tools (2)
Item
Hole
Installation
Sleeve
Slots
Plunger
Switch/LED
Tamper
Switch
Hole Sleeve
CR2 Battery
Sleeve
"Clicker"
Battery
Cover
Self-adhesive Drill
Guides (2)
Power Drill
Description
Slots for installation tool
Detects open/close status of
door . LED Indicator
Detects if sensor is removed
from Hole Sleeve
Accepts sensor and allows for
sensor height adjustment
Aligns with Sleeve Slots to limit
unwanted sensor rotation
Encloses the battery
compartment
Installation Manual
Rubber Mallet
2-1
Advertisement
Table of Contents
