Resetting Factory Defaults - Salus Connected Wireless System Manual

Section 7

Resetting Factory Defaults

Step 1. PressSelect the
SS901ZB icon from the SALUS
Smart Home dashboard . After
the tile flips, choose the device
name in the upper left .
Step 4. Unscrew the
SS901ZB face plate .
After this, the sensor has been reset to factory default settings and will respond to pairing requests .
Module 2 – Wireless Accessories
SS901ZB Water Leak Sensor
Step 2. Scroll to the bottom
of the next screen and select
"Remove Shared Water Leak
Sensor . "
Step 5. Remove the
battery .
Step 3. Notification that the Sensor
will be removed is displayed . Press
"Delete" to continue . The SS901ZB
Icon will be removed from the
application .
Step 6. Insert the battery
while holding the tamper
switch .
Step 7. Screw the face
plate onto the sensor
making sure it is fully
locked and sealed .
7-7