Resetting Factory Defaults - Salus Connected Wireless System Manual

Section 9
Resetting Factory
Defaults
Step 1. Select the SC824ZB icon
from the SALUS Smart Home
dashboard . After the tile flips,
choose the device name in the
upper left .
At this point, the valve has been reset to factory default settings and will respond to pairing requests .
Module 2 – Wireless Accessories
SC824ZB Smart Relay – Low Voltage
Step 2. Scroll to the bottom
of the next screen and select
"Remove shared smart relay"
Step 4. Hold down the Multi-Button for 10 seconds .
Step 5. When the Status LED turns red, release the
Multi-Button .
Step 6. The LED will repeat a sequence of 3 red flashes
followed by a pause while it is searching for a network .
Step 3. Notification that the
Sensor will be removed is
displayed . Press "Delete" to
continue . The SC824ZB Icon
will be removed from the
application .
9-9